wd for mac powers on when plugged in then shuts off

Vendor Specific SMART Attributes with Thresholds: SMART Attributes Data Structure revision number: 16 Smartctl 6.5 r4318 (local build)Ĭopyright (C) 2002-16, Bruce Allen, Christian Franke, I wanted to dd the entire drive to see if could improve the smart data. I found out the HDAT2 (which is really a great and powerful program) writes a time stamp on the second half on each sector during its „normal” READ operation but you can disable this in config options (which I did not realize at first.) Sorry I don’t have an output – I failed to save them and had to do a rollback 🙂 Number Start End Size File system Name FlagsĢ 2040MB 2303MB 263MB linux-swap primary raidįor me parted would complain that it was unable to read disk label (whatever that was) and did not show partition table type. Sector size (logical/physical): 512B/512B Partition 1 has different physical/logical endings: Partition 1 has different physical/logical beginnings (non-Linux?): You can do this from the extra functions menu. Normally parted should show the RAID partitions, but in my case it would show none, so there were no /dev/ files for me to try to mount… Here’s how the output looks on the ~]$ sudo fdisk -l I don’t have a desktop to connect this directly to SATA port. I tried to rebuild the RAID, but didn’t help. The partition is shown as Linux RAID and is visible, as healthy/OK. Only problem is I am not able to mount the partition from old disk to transfer the data. The HDD temp is also well under range (42’c).

The new disk is working fine and no issues. I did this by connecting the disk over a SATA to USB3 dock (Inatek) on a laptop with Ubuntu booted off USB. Prev firmware: Custom 01.02.14, unused services were disabled – twonky, mionet, etc.Ĭouldn’t get the MBWE revision (it’s back in the rack) Model: MBWE I – (White light) (WD10000H1NC) The device was fine so the disk, I wanted to upgade the capacity until I could build my own FreeNAS based NAS. Thanks, Krzysztof Przygoda! This worked for me.

Wd for mac powers on when plugged in then shuts off